TL;DR
Screen printer Hannah Carvell says she found discounted handmade Moroccan tiles for her fireplace at a Bristol shop after designer tile options and delivery came to around £500 or more. Her account also describes unexpected work to remove a metal panel and make room for the tiles and log burner; the final project cost is not provided in the supplied report.
Screen printer Hannah Carvell says she found discounted handmade Moroccan tiles for her fireplace through a Bristol tile shop after tiles from designer brands, including delivery, were estimated at around £500 or more. In an Ideal Home Open House report, she describes how the lower-cost find made her living-room project possible, while also revealing extra practical work around the log burner.
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Carvell was renovating a living room she had painted green, including its walls, ceiling, skirting boards and doors. She painted the relatively new, uniform brick fireplace surround with Dulux Heritage Sage Green emulsion after applying an undercoat. She then wanted to replace the large black metal sheet behind the log burner with tile.
She initially considered options from Maitland & Poate, Otto Tiles and Fired Earth, ordering samples and favoring Otto Tiles’ Amber Arch design. Her measurement suggested she would need about 1.5 square metres, but she reported that even that quantity, with delivery, would cost around £500 or more. The report does not give prices for each brand or a detailed comparison of the products.
Carvell found the Moroccan Encaustic Tile Company through Facebook Marketplace. The Bristol-based shop imported tiles from Marrakech, and collecting them herself meant she could avoid an £80 delivery charge. Rather than commission a new design, she chose discounted leftover stock: a mint-green glazed tile the shop had from an earlier project. The source describes the choice and the estimated cost of the alternatives, but does not state the price she paid or the full final project budget.
How the Tile Choice Changed the Budget
The account illustrates one way a homeowner can reduce the purchase cost of a renovation finish: consider leftover or discounted stock and collect it locally. Carvell’s experience also shows the limits of comparing tile prices alone. The cost of the tile was only one part of a project involving burner removal, preparation and changes to the fireplace opening.
For readers planning similar work, the report offers a practical caution as well as a budget-saving idea. Carvell says she initially thought the tiled area would take about 1.5 square metres, but later realized her estimate was wrong. Buying leftover stock can constrain the amount available, so accurate measurements and allowance for cuts or breakage matter. The supplied report does not say whether she ultimately had enough tiles or what the completed work cost overall.
Products Worth Considering

TCL F8D Series 50-Inch 4K QLED Smart Fire TV

Philips Hue Play HDMI Sync Box

Dyson V9 Motorbar Cordless Vacuum
As an affiliate, we earn on qualifying purchases.
From Green Paint to Fireplace Tile
Carvell presented the project as part of a broader living-room makeover, following earlier work that included painting and having the wooden floors sanded. She said the fireplace bricks were relatively new rather than original; she would not have painted them had they been old and original. That distinction informed her decision to change the surround’s appearance.
The next change involved the black metal sheet behind the log burner. Carvell initially considered whether she could tile around the stove or cover the sheet, but the work proved more involved. She booked a local log-burner fitter to remove and later refit the appliance for £60, according to her account. The metal sheet resisted removal and was eventually taken out with help from a friend and an angle grinder; behind it was a brick wall, with soot present.
The fitter then raised a clearance issue: Carvell says the tiles were thick enough that the burner would not sit back on its ledge without another course of bricks. She and her husband laid that additional course. The supplied source ends while describing the tiling process, so it does not establish the project’s final result or full sequence of later work.
Final Cost and Outcome Not Reported
The supplied article excerpt does not state what Carvell paid for the tiles, the project’s complete cost, or whether the finished fireplace met her initial design expectations. It also ends during her account of laying out the tiles, leaving the final installation details unavailable in the source material.
The report gives no independent verification of the shop’s inventory, the quoted delivery saving or the fitter’s charge; those details are presented as Carvell’s account. It does not specify the tile dimensions, the exact quantity eventually used, or how much additional material was required after her initial estimate proved inadequate.
Fireplace and log-burner installations can involve safety and clearance requirements. Carvell’s account says a fitter identified a clearance problem, but the excerpt does not provide technical specifications, explain which requirements applied, or confirm the final installation was inspected.
Installation Details Still Outstanding
The supplied report does not set out a next publication date or a confirmed follow-up. The remaining details readers would need to judge the project’s overall value are the final tile quantity, tile price and total cost, along with the completed fireplace’s appearance.
For anyone considering comparable work, the immediate practical step is to check measurements and material requirements before buying, particularly when selecting limited leftover stock. The burner’s removal, refitting and clearance should be discussed with a qualified stove professional; the source does not provide enough detail to assess the technical suitability of Carvell’s finished installation.
Key Questions
How much did the designer tile options cost?
Carvell estimated that about 1.5 square metres of the options she was considering, plus delivery, would cost around £500 or more. The report does not provide individual brand prices.
Where did Carvell find her Moroccan tiles?
She found the Moroccan Encaustic Tile Company, a Bristol-based shop that imports tiles from Marrakech, through Facebook Marketplace. She chose discounted leftover mint-green glazed tiles from a previous project.
How much did she save on delivery?
Carvell said she collected the tiles herself and avoided an £80 delivery charge. The article excerpt does not say how much she saved overall compared with the designer tiles.
What complication arose when preparing the fireplace?
The metal sheet behind the log burner was difficult to remove, and a fitter told Carvell the tiles were thick enough to affect the stove’s clearance. She says she and her husband added another course of bricks before tiling.
What was the final cost of the project?
The supplied report does not give the final total or the price Carvell paid for the discounted tiles. It mentions a £60 charge for the fitter to remove and later refit the log burner, but does not establish whether that was the only additional labor cost.
Source: idealhome.co.uk
