Aqara Hub M3 Can Now Bring Existing Security Cameras Into Matter — Without Replacing Them
AIThis post was created with the assistance of artificial intelligence (AI).

TL;DR

Aqara has released a software update that lets its Hub M3 bridge supported security cameras into Matter, so users can connect them to compatible smart-home platforms without replacing the cameras. The G100 is currently the only officially listed model, and each Hub M3 can bind up to four supported cameras.

Aqara has released a software update that lets its Hub M3 bridge security cameras into Matter, allowing owners of supported cameras to connect them to compatible smart-home platforms without replacing their hardware. The G100 is the only camera officially listed as supported so far, and Aqara has not announced when other models may be added.

Before you orderOffer from Amazon

Get home appliances delivered free with Prime

  • Fast, free delivery on millions of items
  • Prime Video, Amazon Music and more included
  • Member-only deals all year
Start your free Prime trial Free trial for eligible customers · Cancel anytime
As an affiliate, we earn on qualifying purchases.

To use the feature, users update the firmware on both the Hub M3 and Camera G100, then select and bind the camera to the hub in the Aqara app. The camera appears as an endpoint under the hub’s Matter bridge. According to Matter Alpha’s report, compatible Matter ecosystems, including Home Assistant and SmartThings, can then discover the connected device.

A single Hub M3 can bind a maximum of four supported cameras. Matter Alpha reported that its tests produced local video streams through SmartThings and the Open Home Foundation Matter Server, but streams did not load in Home Assistant Core during its early testing. That points to a possible software compatibility problem; the report did not establish its cause or whether it has since been fixed.

The feature is available to the general public, according to the report. Aqara’s feature description refers to cameras and doorbells, but the G100 remains the only model specifically confirmed as supported. The report suggests other products could be added, but that possibility is not an announced compatibility commitment.

At a glance
updateWhen: Available now; broader camera support h…
The developmentAqara has made camera bridging available on the Hub M3, adding the G100 as a camera that can be exposed to Matter-compatible smart-home systems.

Existing Cameras Gain a Matter Route

For owners of the supported camera, bridging offers a way to bring video devices into a shared Matter smart-home setup without buying a replacement camera. That may be useful to households trying to manage devices from different brands through one compatible platform, though actual streaming support can vary by ecosystem, as the Home Assistant Core test issue illustrates.

The approach also puts more of the work on the hub rather than on the camera. Matter Alpha’s report says native Matter camera support requires processing resources and software development that can raise costs, particularly for lower-priced devices. A bridge could let manufacturers connect existing hardware to newer platforms without building the full Matter stack into each camera. Aqara has not published cost savings or performance guarantees for this feature, so those broader benefits remain an explanation of the design rather than a measured result.

Products Worth Considering

Levoit Eleva 300X Air Purifier with Fully Sealed HEPA Filtration and Smart Control

Levoit Eleva 300X Air Purifier with Fully Sealed HEPA Filtration and Smart Control

As an affiliate, we earn on qualifying purchases.

How the Hub Bridges Cameras

In a bridged Matter setup, a compatible device connects to a hub, which presents it to Matter platforms as part of the hub’s accessory network. Aqara’s new Hub M3 setting lets users select and bind a camera, after which compatible systems can discover it. The camera is not being converted into a native Matter device; the Hub M3 acts as the bridge.

Matter Alpha describes the feature as a way to avoid the hardware and development demands of putting Matter camera capabilities directly on every camera. It also notes that community projects such as Matterbridge have been used to expose RTSP cameras to Matter. Those projects provide background on the bridging concept, but they do not establish which cameras Aqara’s Hub M3 will support.

The report identifies the G100 as the only officially supported camera at launch. It says Aqara mentions both cameras and doorbells in its feature description, but any future expansion—including support for the G410 Doorbell Camera Hub—is speculation until Aqara confirms it.

“The G100 is the only camera officially listed as supported.”

— Matter Alpha

Compatibility and Streaming Limits

Aqara has not provided a timeline for supporting additional camera or doorbell models. The report’s suggestion that other devices may be added is an inference from the feature description, not confirmation from Aqara. It also does not clarify whether every Matter-compatible platform will display camera streams in the same way.

The reported Home Assistant Core stream failure remains another open point. Matter Alpha described it as a bug during early testing, but gave no cause, software version details, or update status. Readers should check current firmware and platform compatibility before relying on the bridge for a particular setup.

Firmware Updates and Model Support

Users can try the feature now by updating the Hub M3 and G100 firmware and configuring the camera bridge in the Aqara app. Aqara has not announced a date for adding other models, so owners of other cameras or doorbells will need to wait for an official compatibility list or software release.

Further updates may also clarify how streaming works across platforms and whether the Home Assistant Core issue is resolved. Until then, the confirmed scope is limited: up to four supported cameras per Hub M3, with the G100 the only model named as supported in the report.

Key Questions

Which Aqara camera works with the Hub M3 Matter bridge?

The Camera G100 is the only model Matter Alpha reports as officially listed for support. Aqara has not announced compatibility for other models.

Do I need to replace my camera to use the feature?

No replacement is needed if you have a supported camera. You need to update the Hub M3 and G100 firmware and bind the camera to the hub in the Aqara app.

How many cameras can one Hub M3 connect?

The reported limit is four supported cameras per Hub M3.

Does the camera stream work in every Matter platform?

That has not been established. Matter Alpha reported successful streaming through SmartThings and the Open Home Foundation Matter Server, but said its early Home Assistant Core test could not load streams.

Will Aqara add support for doorbells or other cameras?

Aqara has not announced a schedule or confirmed additional models. Matter Alpha points to wording that mentions cameras and doorbells, but future support remains unconfirmed.

Source: matteralpha.com

You May Also Like

Dyson V15 Detect Review: Pros, Cons, and Who It’s For

Comprehensive review of the Dyson V15 Detect, highlighting its features, pros, cons, and ideal users. Find out if this smart cordless vacuum fits your needs.

The Future Of Wet Cat Food Dispensers Is Here. My Review Of Neakasa Riko

A CNET reviewer tested Neakasa’s Riko for a month. It rehydrates freeze-dried food at mealtime, but setup and food compatibility have limits.

Do You Really Need A Camera In Your Dishwasher? 6 New Things Appliances Will Do Next Year, Rated By How Much You’ll Actually Use Them

IFA showcased six planned appliance features for 2027, including AI cameras in ovens and dishwashers. Prices, usefulness and availability vary.

Everything I Set Up In My First Month With An all-Matter Smart Home — And What Still Doesn’t Work

A Matter Alpha report details a month-long smart-home setup, including Thread switches, lighting and sensors—and features that still fall short.